Note: This charger can charger the Xiaomi 5 at QC3.0 mode.
Qualcomm Quick Charge 3.0 Tech :
Quick Charge 3.0 is engineered to refuel devices up to four times faster than conventional charging.With automatic voltage adjustment it provides
better control of power consumption and keeps charging temperature low. It is designed to charge twice as fast as Quick Charge 1.0 and to be 38%
more efficient than Quick Charge 2.0.WithQuick Charge 3.0 you can charge a typical phone from 0 to 80% in about 35 minutes.
Qualcomm Certified (QC3.0): NT6008 Fast Charge Chip:
BlitzWolf BW-S7 uses the NT6008 fast charging chip that not only supports QC3.0 fast charge tech but also is backwards compatible with all
previous versions of Qualcomm Quick Charge technology (1.0, 2.0 & 3.0). It is also compatible with USB Type-C and can provide standard
charging for non-Quick Charge devices.
BC1.2 & Apple Fast Charge Protocol:
It means your Apple devices can be fast charging just like using the original Apple iPad charger (up to 5V/2.4A Max).It is also compatible with all
non-QC devices and will charge at their normal charging speed (up to 5V/2A Max).
Intelligently identifies the electronic device and speaks the language it needs for full speed charging.This allows you to enjoy fast safe charging
that matches your device.
QC3.0+4.4A 40W Powerful Output:
QC3.0 mode: Variable 3.6V-12V with 200mV incremental dynamic regulation
QC2.0 mode: Stepped 5v/2.4A ,9V/2A and 12V/1.5A . Rated at 18W but can peak at up to 12V/2A~24W.
Standard Fast 4.4A Mode: 5V/4.4A. Rated at 22W.
Four Plug Types:
1.5m AC power cord with US UK EU AU plug.
Most of the customers will be able to find a suitable plug.
Safe and Sturdy Design:
Lightweight, compact and easily portable. Contains internal Power3S protection for over-current, overheat, short circuit and over-voltage detection.
We believe in our products and we back them all with an 18 months warranty and provide friendly and convenient support.
|| EU, US, UK,AU
| USB Port
|| 18W(Max) QC3.0 Port + 22W(Max) 4.4A 4-Ports
| Total Power
|| 40W (Max)
|| AC 100-240V~50/60Hz 1A
|| 4-Ports: 5V/4.4A (Max)
| QC3.0 Port: 3.6-6.5V/2.4A
6.5-9V/2A 9-12V/1.5A (Max)
|| 91mm(3.6inch)*58mm(2.3inch)*26mm(1.01 inch)
|| CE,FCC,RoHS,Qualcomm QC3.0
1 * BlitzWolf® BW-S7 QC3.0+4.4A 40W 5 USB Ports Charger
1 * BlitzWolf® BW-S7 User Manual
1 * BlitzWolf® Warranty Card
FAQ & Solutions
1. What is the difference between the Power3S charging ports & Standard charging ports?
The Power3S charging ports are Capable of charging any kinds of device at full speed while the Standard charging ports can only charging the device that fit for
the system of ports at full speed,such as iOS & Android devices
2. What if the 5-ports Desktop Charger is not charging my device(s)?
A. Check to ensure that your device is USB-powered with an input current between 0 and 2.4A and a voltage input of 5V.
B. Check to ensure that the power cord is connected to an active wall outlet and also firmly connected to the dual-port Desktop Charger.
3. How do I check my device’s Input current and voltage?
Please refer to your device’s user manual, original OEM charging adapter, or contact the manufacturer to determine this information.
4. My device charges at 1Amp,will this charger’s 2.4Amp output harm it?
No. The charger will only supply the maximum charge current allowed by your device up to 2.4Amps.
5. Will my device charge at full speed 2.4A?
2.4A charging is dependent on the capability of your device, please check your smartphone’s manual to see the maximum Amps (A) your device can charge at.
6.What should I do if one port isn’t working properly?
If a port is not working properly ,it may be because your device has triggered the protective internal safety switch.In order to reset the switch , unplug all
the cables ( including the power cable ) for five seconds and try again . The charger can work perfectly again.
7. What is different between the 2.4A port & QC3.0 port?
Both of them support Power3S tech can identify what devices you use and give max charging power that your devices can compatible. If your
devices compatible with QC3.0 fast charge tech, please plug in QC3.0 port and your devices charging speeds will of up to 80% faster than 2.4A
port or another normal chargers.
8.If my devices is not compatible with QC3.0, can I use the QC3.0 port to charge?
Thanks for Power3S identify tech that you can use QC3.0 port to charge your un-QC3.0 devices as same as 2.4A port which maximum support 5V/2.4A